Last Modified: 6-7-2017 6.8:8.0.40 Doc ID: RM0000018ZN002X
Model Year Start: 2007 Model: Land Cruiser Prod Date Range: [08/2006 -           ]
Title: METER: METER / GAUGE SYSTEM: Warning Light Circuit; 2007 MY Land Cruiser [08/2006 -        ]

Warning Light Circuit

WIRING DIAGRAM

INSPECTION PROCEDURE

PROCEDURE

1.

PERFORM ACTIVE TEST USING INTELLIGENT TESTER (OPEN DOOR WARNING LIGHT)*1

(a) Connect the intelligent tester to the DLC3.

(b) Check that the open door warning light operates using ACTIVE TEST 2007 MY Land Cruiser [08/2006 -        ]; METER: METER / GAUGE SYSTEM: DATA LIST / ACTIVE TEST .

OK

PROCEED TO NEXT CIRCUIT INSPECTION SHOWN ON PROBLEM SYMPTOMS TABLE

NG

2.

CHECK COMBINATION METER CIRCUIT
NG

REPLACE COMBINATION METER ASSEMBLY

OK

3.

CHECK WIRE HARNESS (BODY ECU - COMBINATION METER ASSEMBLY)
NG

REPAIR OR REPLACE HARNESS AND CONNECTOR

OK

PROCEED TO NEXT CIRCUIT INSPECTION SHOWN ON PROBLEM SYMPTOMS TABLE