| Last Modified: 6-7-2017 | 6.8:8.0.40 | Doc ID: RM000001ACB001X |
| Model Year Start: 2007 | Model: Land Cruiser | Prod Date Range: [08/2006 - ] |
| Title: METER: METER / GAUGE SYSTEM: DATA LIST / ACTIVE TEST; 2007 MY Land Cruiser [08/2006 - ] | ||
DATA LIST / ACTIVE TEST
1. READ DATA LIST
HINT:
Using the intelligent tester's DATA LIST allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.
(a) Connect the intelligent tester (with CAN VIM) to the DLC3.
(b) Turn the ignition switch ON.
(c) Read the DATA LIST according to the display on the tester.
Body ECU
|
Item |
Measurement Item / Display (Range) |
Normal Condition |
Diagnostic Note |
|---|---|---|---|
|
PARKING BRAKE SW |
Parking brake switch |
ON: Parking brake switch is ON position OF: Parking brake switch is OFF position |
- |
2. PERFORM ACTIVE TEST
HINT:
Performing the intelligent tester's ACTIVE TEST allows relay, VSV actuator and other item values to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time. The DATA LIST can be displayed during the Active Test.
(a) Connect the intelligent tester (with CAN VIM) to the DLC3.
(b) Turn the ignition switch ON.
(c) Perform the ACTIVE TEST according to the display on the tester.
Body ECU
|
Item |
Test Details |
Diagnostic Note |
|---|---|---|
|
OPN DOR WRN LGT |
Open door warning light ON / OFF |
- |
|
|