|
Last Modified: 6-7-2017 |
6.8:8.0.40 |
Doc ID: RM000001B5F002X |
|
Model Year Start: 2007 |
Model: Land Cruiser |
Prod Date Range: [08/2006 -
] |
|
Title: NAVIGATION: NAVIGATION SYSTEM: Driving Directions Opposite to Moving Direction of Vehicle Position Mark; 2007 MY Land Cruiser [08/2006 - ] |
|
Driving Directions Opposite to Moving Direction of Vehicle Position Mark
|
INSPECTION PROCEDURE
PROCEDURE
|
1.
|
CHECK VEHICLE SIGNAL (CHECK MODE)
|
(a)
Enter the Navigation Check mode (Vehicle Sensors)
![2007 MY Land Cruiser [08/2006 - ]; NAVIGATION: NAVIGATION SYSTEM: DTC CHECK / CLEAR](../../../../stylegraphics/info.gif "2007 MY Land Cruiser [08/2006 - ]; NAVIGATION: NAVIGATION SYSTEM: DTC CHECK / CLEAR")
(b) Check the reverse signal (REV).
| OK |
|
REPLACE NAVIGATION ECU
|
| NG |
|
|
|
2.
|
CHECK REVERSE SIGNAL CIRCUIT
|
(a)
Check the reverse signal circuit
.
| OK |
|
REPLACE NAVIGATION ECU
|
| NG |
|
REPAIR OR REPLACE HARNESS AND CONNECTOR
|
|
