Last Modified: 6-7-2017 6.8:8.0.40 Doc ID: RM000001C50003X
Model Year Start: 2007 Model: Land Cruiser Prod Date Range: [08/2006 -           ]
Title: AXLE: REAR AXLE SHAFT: INSPECTION; 2007 MY Land Cruiser [08/2006 -        ]

INSPECTION

1. INSPECT REAR AXLE SHAFT

(a) Using a dial indicator, measure the runout of the shaft and flange.

Maximum runout:

Item

Specified Condition

Shaft runout

2.0 mm (0.079 in.)

Flange runout

0.05 mm (0.0020 in.)

If the rear axle shaft or flange are damaged or worn, or if the runout is greater than the maximum, replace the rear axle shaft.