Last Modified: 6-7-2017 6.8:8.0.40 Doc ID: RM000001D18002X
Model Year Start: 2007 Model: Land Cruiser Prod Date Range: [08/2006 -           ]
Title: AUDIO / VISUAL: MULTI-DISPLAY (w/o Navigation System): Clock Loses or Gains Time; 2007 MY Land Cruiser [08/2006 -        ]

Clock Loses or Gains Time

INSPECTION PROCEDURE

PROCEDURE

1.

INSPECT BATTERY

(a) Measure the voltage of the battery.

Standard voltage:

11 to 14 V

NG

RECHARGE OR REPLACE BATTERY

OK

2.

INSPECT ERROR OF CLOCK

(a) Check that the clock adjusting button is sticking in position and has failed to return.

(b) Inspect the error of the clock.

OK:

Allowable error (per day) is +- 1.5 seconds.

NG

REPLACE MULTI-DISPLAY

OK

3.

CHECK WIRE HARNESS (MULTI-DISPLAY - BATTERY)

(a) Disconnect the M9 display connector.

(b) Measure the voltage of the wire harness side connector.

Standard voltage:

Tester Connection

Condition

Specified Condition

M9-9 (+B) - Body ground

Always

10 to 14 V

M9- 10 (ACC) - Body ground

Ignition switch ACC

10 to 14 V
NG

REPAIR OR REPLACE HARNESS AND CONNECTOR

OK

REPLACE MULTI-DISPLAY OR ADJUST CLOCK