CD Sound Skips
Circuit diagnosis · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
INSPECTION PROCEDURE
| 1. CHECK DISC |
 |
- Check that the disc is not deformed or cracked.
- OK:
- No deformation or cracks on the disc.
|
NG |
 |
|
|
|
| OK |
|
 |
|
| 2. CHECK DISC |
 |
- Disc cleaning
If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.
- OK:
- Malfunction disappears.
- NOTICE:
- Do not use a conventional record cleaner or antistatic preservative.
|
NG |
 |
|
|
|
| OK |
|
 |
|
|
| 3. REPLACE DISC WITH ANOTHER AND RECHECK |
 |
Replace the disc with a known good one and check that the malfunction disappears.
- OK:
- Malfunction disappears.
|
NG |
 |
|
|
|
| OK |
|
 |
|
|
| 4. CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY |
 |
Check that the radio and display receiver assembly is properly installed
- OK:
- radio and display receiver assembly is properly installed.
|
NG |
 |
|
| REINSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY (Click here)
|
|
|
| OK |
|
 |
|
| REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY (Click here)
|
|