BASIC INSPECTION
Troubleshooting · Vehicles built from Aug 2013
When the malfunction cannot be confirmed by the DTC check, troubleshooting should be carried out for all circuits considered to be possible causes of the problem. In many cases, by carrying out the basic engine check shown in the following flowchart, the location of the problem can be found quickly and efficiently. Therefore, using this check is essential when troubleshooting the engine.
| 1.CHECK BATTERY VOLTAGE |
- NOTICE:
- Conduct this check with the engine stopped and the ignition switch off.
- Result:
Result
Proceed to
11 V or higher
OK
Below 11 V
NG
|
|||||
| |||||
| 2.CHECK WHETHER ENGINE CRANKS |
|
|||||
| |||||
| 3.CHECK WHETHER ENGINE STARTS |
|
|||||
| |||||
| 4.CHECK AIR FILTER |
Visually check that the air filter is not excessively contaminated with dirt or oil.
|
|||||
| |||||
| 5.CHECK IDLE SPEED |
|
|||||
| |||||
| 6.CHECK FUEL PRESSURE |
|
|||||
| |||||
| 7.CHECK FOR SPARK |
|
|||||
| |||||