FAIL-SAFE CHART
System information · Vehicles built from Aug 2013
| Automatic Light Control System |
| AUTOMATIC HEADLIGHT BEAM LEVEL CONTROL SYSTEM |
| Malfunctioning Part |
Detection Condition |
Leveling Fail-safe Control |
Warning Light |
| Speed Sensor |
Speed sensor signal malfunction |
Continues control. |
Flashes |
| Rear Height Control Sensor*1 |
Rear height control sensor signal malfunction |
|
Flashes |
| Source voltage malfunction | |||
| Suspension control ECU*2 |
Height control signal malfunction |
|
Flashes |
| Source voltage malfunction | |||
| Headlight Leveling Motor |
Headlight leveling motor communication error |
Normal headlight leveling motor:
|
Flashes |
Headlight leveling motor malfunction
|
Normal headlight leveling motor:
|
Flashes |
|
| Voltage malfunction |
Abnormal headlight leveling motor:
|
Off |
|
| CAN Communication System |
Communication signal malfunction (Main body ECU) |
Continues control. |
Flashes |
| Communication signal malfunction (Skid control ECU) |
Judges that the vehicle speed is 0 km/h (0 mph) and continues control. |
||
| Headlight Swivel ECU |
Vehicle specifications unconfirmed |
Continues control |
Flashes |
| Rear height control sensor initialization unconfirmed |
Both headlight leveling motors:
|
Blinks 6 times after ignition switch is turned from off to ON |
- *1: w/o Air Suspension System
- *2: w/ Air Suspension System