Terminal No. (Symbol)
|
Wiring Color
|
Terminal Description
|
Condition
|
Specified Condition
|
G59-17 (BATT) - C64-5 (E1)
|
L - BR
|
Battery (for measuring battery voltage and for ECM memory)
|
Always
|
11 to 14 V
|
G59-22 (+BM) - C64-5 (E1)
|
GR - BR
|
Power source of throttle actuator
|
Always
|
11 to 14 V
|
G60-22 (IGSW) - C64-5 (E1)
|
W - BR
|
Ignition switch
|
Ignition switch ON
|
11 to 14 V
|
G59-23 (+B) - C64-5 (E1)
|
W - BR
|
Power source of ECM
|
Ignition switch ON
|
11 to 14 V
|
G60-12 (MREL) - C64-5 (E1)
|
V - BR
|
EFI relay
|
Ignition switch ON
|
11 to 14 V
|
C61-10 (VCTA) - C62-16 (E2)
|
B - W-R
|
Power source of sensor (specific voltage)
|
Ignition switch ON
|
4.5 to 5.5 V
|
C61-3 (VTA1) - C61-9 (ETA)
|
LG - W
|
Throttle position sensor (for engine control)
|
Ignition switch ON, accelerator pedal fully released
|
0.5 to 1.1 V
|
C61-3 (VTA1) - C61-9 (ETA)
|
LG - W
|
Throttle position sensor (for engine control)
|
Ignition switch ON, accelerator pedal fully depressed
|
3.2 to 4.8 V
|
C61-4 (VTA2) - C61-9 (ETA)
|
G-W - W
|
Throttle position sensor (for sensor malfunction detection)
|
Ignition switch ON, accelerator pedal fully released
|
2.1 to 3.1 V
|
C61-4 (VTA2) - C61-9 (ETA)
|
G-W - W
|
Throttle position sensor (for sensor malfunction detection)
|
Ignition switch ON, accelerator pedal fully depressed
|
4.6 to 5.0 V
|
G60-6 (VPA) - G60-2 (EPA)
|
L - P
|
Accelerator pedal position sensor (for engine control)
|
Ignition switch ON, accelerator pedal fully released
|
0.5 to 1.1 V
|
G60-6 (VPA) - G60-2 (EPA)
|
L - P
|
Accelerator pedal position sensor (for engine control)
|
Ignition switch ON, accelerator pedal fully depressed
|
2.6 to 4.5 V
|
G60-5 (VPA2) - G60-1 (EPA2)
|
GR - W
|
Accelerator pedal position sensor (for sensor malfunction detection)
|
Ignition switch ON, accelerator pedal fully released
|
1.2 to 2.0 V
|
G60-5 (VPA2) - G60-1 (EPA2)
|
GR - W
|
Accelerator pedal position sensor (for sensor malfunction detection)
|
Ignition switch ON, accelerator pedal fully depressed
|
3.4 to 4.75 V
|
G60-4 (VCPA) - C64-5 (E1)
|
LG - BR
|
Power source of accelerator pedal position sensor (for VPA)
|
Ignition switch ON
|
4.5 to 5.5 V
|
G60-3 (VCP2) - C64-5 (E1)
|
R - BR
|
Power source of accelerator pedal position sensor (for VPA2)
|
Ignition switch ON
|
4.5 to 5.5 V
|
C61-13 (VG) - C61-7 (E2G)
|
W-R - B-W
|
Mass air flow meter
|
Idling, shift lever in P or N (for A/T) or neutral (for M/T), A/C switch off
|
0.5 to 3.0 V
|
C61-12 (THA) - C61-11 (ETHA)
|
Y-B - W-R
|
Intake air temperature sensor
|
Idling, intake air temperature 20°C (68°F)
|
0.5 to 3.4 V
|
C61-18 (THW) - C61-17 (ETHW)
|
R-L - L-B
|
Engine coolant temperature sensor
|
Idling, engine coolant temperature 80°C (176°F)
|
0.2 to 1.0 V
|
C64-6 (#10) - C64-11 (E01)
|
L - W-B
|
Fuel injector assembly
|
Ignition switch ON
|
11 to 14 V
|
C64-7 (#20) - C64-11 (E01)
|
G - W-B
|
Fuel injector assembly
|
Ignition switch ON
|
11 to 14 V
|
C64-8 (#30) - C64-11 (E01)
|
R - W-B
|
Fuel injector assembly
|
Ignition switch ON
|
11 to 14 V
|
C64-9 (#40) - C64-11 (E01)
|
W - W-B
|
Fuel injector assembly
|
Ignition switch ON
|
11 to 14 V
|
C64-6 (#10) - C64-11 (E01)
|
L - W-B
|
Fuel injector assembly
|
Idling
|
Pulse generation (See waveform 1)
|
C64-7 (#20) - C64-11 (E01)
|
G - W-B
|
Fuel injector assembly
|
Idling
|
Pulse generation (See waveform 1)
|
C64-8 (#30) - C64-11 (E01)
|
R - W-B
|
Fuel injector assembly
|
Idling
|
Pulse generation (See waveform 1)
|
C64-9 (#40) - C64-11 (E01)
|
W - W-B
|
Fuel injector assembly
|
Idling
|
Pulse generation (See waveform 1)
|
C64-1 (IGT1) - C64-5 (E1)
|
R-Y - BR
|
Ignition coil assembly (ignition signal)
|
Idling
|
Pulse generation (See waveform 2)
|
C64-2 (IGT2) - C64-5 (E1)
|
R-L - BR
|
Ignition coil assembly (ignition signal)
|
Idling
|
Pulse generation (See waveform 2)
|
C64-3 (IGT3) - C64-5 (E1)
|
G-B - BR
|
Ignition coil assembly (ignition signal)
|
Idling
|
Pulse generation (See waveform 2)
|
C64-4 (IGT4) - C64-5 (E1)
|
G-W - BR
|
Ignition coil assembly (ignition signal)
|
Idling
|
Pulse generation (See waveform 2)
|
C64-10 (IGF1) - C64-5 (E1)
|
G-R - BR
|
Ignition coil assembly (ignition confirmation signal)
|
Ignition switch ON
|
4.5 to 5.0 V
|
C64-10 (IGF1) - C64-5 (E1)
|
G-R - BR
|
Ignition coil assembly (ignition confirmation signal)
|
Idling
|
Pulse generation (See waveform 2)
|
C62-11 (G2) - C62-5 (NE-)
|
W - B
|
Camshaft position sensor
|
Idling
|
Pulse generation (See waveform 3)
|
C62-12 (NE+) - C62-5 (NE-)
|
W - B
|
Crankshaft position sensor
|
Idling
|
Pulse generation (See waveform 3)
|
G60-25 (FC) - C64-5 (E1)
|
G - BR
|
Fuel pump control
|
Ignition switch ON
|
11 to 14 V
|
G60-25 (FC) - C64-5 (E1)
|
G - BR
|
Fuel pump control
|
Idling
|
Below 1.5 V
|
C64-14 (M+) - C64-13 (ME01)
|
P - W-B
|
Throttle actuator
|
Idling with warm engine
|
Pulse generation (See waveform 4)
|
C64-15 (M-) - C64-13 (ME01)
|
L - W-B
|
Throttle actuator
|
Idling with warm engine
|
Pulse generation (See waveform 5)
|
C63-7 (A1A+) - C64-5 (E1)
|
P - BR
|
Air fuel ratio sensor
|
Ignition switch ON
|
3.3 V*1
|
C63-1 (A1A-) - C64-5 (E1)
|
L - BR
|
Air fuel ratio sensor
|
Ignition switch ON
|
3.0 V*1
|
C63-13 (OX1B) - C62-16 (E2)
|
B - W-R
|
Heated oxygen sensor
|
Engine speed maintained at 2500 rpm for 2 minutes after warming up sensor
|
Pulse generation (See waveform 6)
|
C63-6 (HA1A) - C63-23 (E04)
|
R-L - BR
|
Air fuel ratio sensor
|
Idling
|
Pulse generation (See waveform 7)
|
C63-6 (HA1A) - C63-23 (E04)
|
R-L - BR
|
Air fuel ratio sensor
|
Ignition switch ON
|
11 to 14 V
|
C63-18 (HT1B) - C63-14 (EX1B)
|
L-R - L-W
|
Heated oxygen sensor heater
|
Idling
|
Below 3.0 V
|
C63-18 (HT1B) - C63-14 (EX1B)
|
L-R - L-W
|
Heated oxygen sensor heater
|
Ignition switch ON
|
11 to 14 V
|
C61-6 (KNK1) - C61-5 (EKNK)
|
B - W
|
Knock sensor
|
Maintain Engine speed maintained at 4000 rpm after warming up engine
|
Pulse generation (See waveform 8)
|
C62-14 (OC1+) - C62-9 (OC1-)
|
G-Y - L-B
|
Camshaft timing oil control valve assembly
|
Idling
|
Pulse generation (See waveform 9)
|
C63-19 (PRG) - C64-11 (E01)
|
P - W-B
|
Purge VSV
|
Ignition switch ON
|
11 to 14 V
|
C63-19 (PRG) - C64-11 (E01)
|
P - W-B
|
Purge VSV
|
Idling
|
Pulse generation (See waveform 10)
|
G60-8 (STA) - C64-5 (E1)
|
W - BR
|
Starter signal
|
Shift lever in N (for A/T) or neutral (M/T), ignition switch START
|
5.5 V or higher
|
G60-18 (STP) - C64-5 (E1)
|
V - BR
|
Stop light switch
|
Brake pedal depressed
|
7.5 to 14 V
|
G60-18 (STP) - C64-5 (E1)
|
V - BR
|
Stop light switch
|
Brake pedal released
|
Below 1.5 V
|
G59-8 (ST1-) - C64-5 (E1)
|
B - BR
|
Stop light switch
|
Ignition switch ON, brake pedal depressed
|
Below 1.5 V
|
G59-8 (ST1-) - C64-5 (E1)
|
B - BR
|
Stop light switch
|
Ignition switch ON, brake pedal released
|
7.5 to 14 V
|
G59-13 (W) - C64-5 (E1)
|
V - BR
|
MIL
|
Idling
|
11 to 14 V
|
G59-13 (W) - C64-5 (E1)
|
V - BR
|
MIL
|
Ignition switch ON
|
Below 3.5 V
|
G60-29 (TACH) - C64-5 (E1)
|
P - BR
|
Engine speed
|
Idling
|
Pulse generation (See waveform 11)
|
G60-16 (SPD) - C64-5 (E1)
|
R - BR
|
Speed signal from combination meter
|
Driving at 20 km/h (12 mph)
|
Pulse generation (See waveform 12)
|
G60-13 (TC) - C64-5 (E1)
|
V - BR
|
Terminal TC of DLC3
|
Ignition switch ON
|
11 to 14 V
|
G59-3 (PSW) - C64-5 (E1)
|
G - BR
|
Power steering oil pressure switch
|
Steering wheel turning
|
Below 1.5 V
|
G60-24 (NSW) - C64-5 (E1)*2
|
B - BR
|
Park/Neutral switch signal
|
Ignition switch ON and shift lever in P or N
|
Below 1 V
|
G60-24 (NSW) - C64-5 (E1)*2
|
B - BR
|
Park/Neutral switch signal
|
Ignition switch ON and shift lever not in P or N
|
11 to 14 V
|
G60-15 (NEO) - C64-5 (E1)
|
P - BR
|
Engine speed signal to power management control ECU
|
Idling with warm engine
|
Pulse generation (See waveform 13)
|
G60-34 (CANH) - C64-5 (E1)
|
LG - BR
|
Signal for communication with other components
|
Ignition switch ON
|
Pulse generation (See waveform 14)
|
G60-33 (CANL) - C64-5 (E1)
|
W - BR
|
Signal for communication with other components
|
Ignition switch ON
|
Pulse generation (See waveform 15)
|
G60-36 (CANP) - C64-5 (E1)
|
BR - BR
|
Signal for communication with other components
|
Ignition switch ON
|
Pulse generation (See waveform 14)
|
G60-35 (CANN) - C64-5 (E1)
|
GR - BR
|
Signal for communication with other components
|
Ignition switch ON
|
Pulse generation (See waveform 15)
|
C62-6 (VC) - C61-7 (E2G)
|
W-R - B-W
|
Power source of air pressure sensor
|
Ignition switch ON
|
4.5 to 5.5 V
|
G59-1 (AIP) - C61-7 (E2G)
|
L - B-W
|
Secondary air injection system pressure signal
|
Ignition switch ON
|
3.0 to 3.6 V
|
G59-6 (AIRV) - C64-5 (E1)
|
P - BR
|
Air switching valve for secondary air injection system
|
Ignition switch ON
|
11 to 14 V
|
G59-19 (AIRP) - C64-5 (E1)
|
GR - BR
|
Air pump control
|
Ignition switch ON
|
11 to 14 V
|
G60-30 (AIDI) - C64-5 (E1)
|
G - BR
|
Diagnostic information signal for secondary air injection system
|
Secondary air injection system operating
|
Pulse generation (See waveform 16)
|