2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

DISASSEMBLY

Removal / installation · Vehicles built from Aug 2013


1. REMOVE INTAKE VALVE

  1. A221102E01
    Using SST, compress the inner compression spring and remove the valve spring retainer locks.
    SST
    09202-70020   (09202-00010)

  1. Remove the valve spring retainer, inner compression spring and intake valve.

    HINT:
    Arrange the removed parts in the correct order.


2. REMOVE EXHAUST VALVE

  1. A221103E01
    Using SST, compress the inner compression spring and remove the valve spring retainer locks.
    SST
    09202-70020   (09202-00010)

  1. Remove the valve spring retainer, inner compression spring and exhaust valve.

    HINT:
    Arrange the removed parts in the correct order.


3. REMOVE VALVE STEM OIL SEAL

  1. A221104
    Using needle-nose pliers, remove the valve stem oil seals.


4. REMOVE VALVE SPRING SEAT

  1. A221105
    Using compressed air and a magnet hand, remove the valve spring seats by blowing air onto them.


5. REMOVE NO. 1 STRAIGHT SCREW PLUG

  1. A221106E01
    Using a 10 mm hexagon wrench, remove the 4 No. 1 straight screw plugs and 4 gaskets.
    Text in Illustration 
    *A
    RH
    *B
    LH

    NOTICE:
    If coolant leaks from a straight screw plug or a plug is corroded, replace it.


6. REMOVE NO. 2 STRAIGHT SCREW PLUG

  1. A221107E01
    Using a 14 mm hexagon wrench, remove the 2 No. 2 straight screw plugs and 2 gaskets.
    Text in Illustration 
    *A
    RH
    *B
    LH

    NOTICE:
    If coolant leaks from a straight screw plug or a plug is corroded, replace it.


7. REMOVE STUD BOLT

NOTICE:
If a stud bolt is deformed or its threads are damaged, replace it.

← COMPONENTS (from Aug 2013)INSPECTION (from Aug 2013) →