INSTALLATION
Removal / installation · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
| 1. INSTALL KNOCK SENSOR |
Install the knock sensor with the bolt.

Text in Illustration 

Front
- Torque:
- 20 N*m{ 204 kgf*cm , 15 ft.*lbf }
- NOTICE:
- Make sure that the knock sensor is at the correct angle when installing.
Connect the knock sensor connector.
| 2. INSTALL INTAKE MANIFOLD |
Install the intake manifold (Click here).
