INSTALLATION
Removal / installation · Vehicles built from Aug 2013
| 1. INSTALL PCV VALVE SUB-ASSEMBLY |
Apply adhesive to 2 or 3 threads of the valve.
- Adhesive:
- Toyota genuine adhesive 1324, three bond 1324 or equivalent
Using a 22 mm ball joint lock nut wrench, install the PCV valve.
- Torque:
- 5.0 N*m{ 51 kgf*cm , 44 in.*lbf }
- NOTICE:
- Use the formula to calculate special torque values for situations where a ball joint lock nut wrench is combined with a torque wrench (Click here).
Connect the PCV hose.
