2013-2015 Land Cruiser Prado · Service Manual Steering

DISASSEMBLY

Removal / installation · Vehicles built from Aug 2013


1. SECURE VANE PUMP ASSEMBLY

  1. C215469E01
    Using SST, secure the vane pump assembly in a vise.
    SST
    09630-00014   (09631-00132)


2. REMOVE SUCTION PORT UNION

  1. C215469E02
    Remove the bolt and suction port union.

  1. Remove the O-ring from the suction port union.


3. REMOVE VANE PUMP REAR HOUSING

  1. G021499
    Remove the 4 bolts and vane pump rear housing.

  1. Remove the O-ring from the vane pump rear housing.


4. REMOVE VANE PUMP ROTOR
  1. Remove the 10 vane pump plates.

  1. Remove the vane pump rotor.


5. REMOVE VANE PUMP CAM RING
  1. Remove the vane pump cam ring from the vane pump front housing.


6. REMOVE FRONT VANE PUMP SIDE PLATE
  1. Remove the front vane pump side plate from the vane pump front housing.

  1. C101969
    Remove the O-ring from the front vane pump side plate.

  1. C101970
    Remove the O-ring from the vane pump front housing.


7. REMOVE VANE PUMP GEAR

  1. C219405
    Using a screwdriver, remove the snap ring from the vane pump front housing.

  1. C102430E02
    Wrap the serration of the vane pump shaft with protective tape.
    Text in Illustration 
    *1
    Press
    *2
    Protective Tape

  1. Using a press, remove the vane pump shaft from the vane pump front housing.

    NOTICE:
    Do not drop the vane pump shaft.

  1. C219480E01
    Place the socket wrench (12 mm) on the vane pump shaft.
    Text in Illustration 
    *1
    Press
    *2
    Socket Wrench (12 mm)

  1. Using SST and a press, remove the vane pump gear from the vane pump shaft.

    SST
    09950-00020  


8. REMOVE VANE PUMP SHAFT BEARING

  1. C219481E01
    Using SST and a press, remove the vane pump shaft bearing from the vane pump shaft.
    SST
    09950-00020  
    Text in Illustration 
    *1
    Press

  1. C101975
    Using a snap ring expander, remove the snap ring from the vane pump shaft.


9. REMOVE VANE PUMP HOUSING OIL SEAL

  1. C101976E03
    Using SST, remove the vane pump housing oil seal from the vane pump front housing.
    SST
    09319-60020  
    09527-10011  
    Text in Illustration 
    *a
    Hold
    *b
    Turn

← REMOVAL (from Aug 2014)INSPECTION (from Aug 2013) →