2013-2015 Land Cruiser Prado · Service Manual Brake

FAIL-SAFE CHART

System information · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014


FAIL-SAFE OPERATION
  1. If there is a problem with sensor signals or brake actuator systems, the skid control ECU will prohibit power supply to the brake actuator and terminate ABS control.
    ABS control is prohibited, but EBD control continues to the extent that it is possible. If EBD control is impossible, the brake warning light comes on to warn the driver (Click here).
  2. If a system component has any malfunction before control begins, operation is prohibited. If a system component has any malfunction during control, the system will gradually stop operating so as not to trigger a sudden change in vehicle conditions.
    If it is impossible to control the systems, the warning light comes on to inform the driver of termination of control of the systems (Click here).
ABS, EBD and BA Systems 
Malfunction Area
Control Method
ABS
ABS and BA control prohibited
BA system
ABS and BA control prohibited
EBD system
ABS, EBD and BA control prohibited
← FAIL-SAFE CHART (Aug 2013 – Jul 2014)DATA LIST / ACTIVE TEST (from Aug 2013) →