2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

INSTALLATION

Removal / installation · Vehicles built from Aug 2013


1. INSTALL IGNITION SWITCH ASSEMBLY
  1. for Manual Transmission:

    1. Install the ignition switch with the 2 screws.

    2. Connect the ignition switch connector and attach the wire harness clamp.

  1. for Automatic Transmission:

    1. Attach the claw to connect the key interlock solenoid wire harness to the ignition switch.

    2. Install the ignition switch with the 2 screws.

    3. Connect the ignition switch connector and key interlock solenoid connector and attach the wire harness clamp.


2. INSTALL LOWER STEERING COLUMN COVER
  1. Attach the 2 claws to install the lower steering column cover.

  1. Install the 2 screws.

    HINT:
    Turn the steering wheel to the right and left as necessary to install the 2 screws.

← INSPECTION (from Aug 2013)ON-VEHICLE INSPECTION (from Aug 2013) →