2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

REMOVAL

Removal / installation · Vehicles built from Aug 2013

HINT:
  1. Use the same procedure for LHD and RHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. REMOVE LOWER STEERING COLUMN COVER
  1. Remove the 2 screws.

    HINT:
    Turn the steering wheel to the right and left as necessary to remove the 2 screws.

  1. A222873
    Detach the 2 claws and remove the lower steering column cover.


2. REMOVE IGNITION SWITCH ASSEMBLY

  1. A222876
    Disconnect the ignition switch connector and detach the wire harness clamp.

  1. Remove the 2 screws and ignition switch.

← COMPONENTS (from Aug 2013)INSPECTION (from Aug 2013) →