REMOVAL
Removal / installation · Vehicles built from Aug 2013
| 1. REMOVE LOWER STEERING COLUMN COVER |
Remove the 2 screws.
- HINT:
- Turn the steering wheel to the right and left as necessary to remove the 2 screws.
Detach the 2 claws and remove the lower steering column cover.

| 2. REMOVE IGNITION SWITCH ASSEMBLY |
for Manual Transmission:

Disconnect the ignition switch connector and detach the wire harness clamp.
Remove the 2 screws and ignition switch.
for Automatic Transmission:

Disconnect the ignition switch connector and key interlock solenoid connector and detach the wire harness clamp.
Remove the 2 screws and ignition switch.
Detach the claw and disconnect the key interlock solenoid wire harness from the ignition switch.
