2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

B1000/31 Center Airbag Sensor Assembly Malfunction

Diagnostic trouble codes · Vehicles built Aug 2013 – Jul 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

DESCRIPTION

The center airbag sensor consists of the airbag sensor, safing sensor, drive circuit, diagnosis circuit, ignition control, etc.
If the center airbag sensor receives signals from the airbag sensor, it determines whether the SRS should be activated.
DTC B1000/31 is stored when a malfunction is detected in the center airbag sensor.
DTC Code
DTC Detection Condition
Trouble Area
B1000/31
A center airbag sensor malfunction.
Center airbag sensor assembly

HINT:
When a trouble code is output simultaneously with B1000/31, repair the malfunction indicated by the other code first.


INSPECTION PROCEDURE


1. CHECK FOR DTC
  1. Turn the ignition switch to ON, and wait for at least 60 seconds.

  1. Check for DTCs (Click here).

    Result 
    Result
    Proceed to
    DTC B1000/31 is output
    A
    DTC B1000/31 and other DTCs are output
    B



B
GO TO DIAGNOSTIC TROUBLE CODE CHART (Click here)
A

REPLACE CENTER AIRBAG SENSOR ASSEMBLY (Click here)


← DIAGNOSTIC TROUBLE CODE CHART (from Aug 2014)B1000/31 Center Airbag Sensor Assembly Malfunction (from Aug 2014) →