Recheck for DTCs. Based on the DTC output in the first step, try to force output of the navigation system*1 or audio and visual system*2 DTC by simulating the operation indicated by the DTC.
*1: w/ Navigation System (for Navigation Receiver Type) or w/ Navigation System (for Radio and Display Type)
*2: w/o Navigation System
HINT:
If the system cannot enter the diagnosis mode, inspect each AVC-LAN communication signal and repair or replace problem parts.
Even if the malfunction symptom is not confirmed, check for DTCs. This is because the system stores past DTCs.
Refer to the detailed description on the diagnostic screen, as necessary.
w/ Navigation System (for Navigation Receiver Type): Click here
w/ Navigation System (for Radio and Display Type): Click here