ADJUSTMENT
Removal / installation · Vehicles built from Aug 2013
| 1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY |
![]() ![]() |
Loosen the bolt of the park/neutral position switch and move the shift lever to N.
Align the groove with the neutral basic line.
Text in Illustration *1
Groove
*2
Neutral Basic Line
Hold the switch in position and tighten the bolt.
- Torque:
- 13 N*m{ 130 kgf*cm , 9 ft.*lbf }
After the adjustment, perform the on-vehicle inspection (Click here).


