2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

DISASSEMBLY

Removal / installation · Vehicles built from Aug 2013


1. REMOVE VALVE LIFTER
  1. Remove the valve lifter and adjusting shim.

    HINT:
    Arrange the valve lifters and shims in the correct order.


2. REMOVE INTAKE VALVE

  1. A057444E02
    Using SST, compress the spring and remove the 2 retainer locks.
    SST
    09202-70020   (09202-00030)

  1. Remove the spring retainer, spring, valve and spring seat plate washer.

    HINT:
    Arrange the valves, springs, spring seat plate washers and spring retainers in the correct order.


3. REMOVE EXHAUST VALVE

  1. A059347E02
    Using SST, compress the spring and remove the 2 retainer locks.
    SST
    09202-70020   (09202-00030)

  1. Remove the spring retainer, spring, valve and spring seat plate washer.

    HINT:
    Arrange the valves, springs, spring seat plate washers and spring retainers in the correct order.


4. REMOVE VALVE STEM OIL SEAL
  1. Using needle-nose pliers, remove the oil seals.


5. REMOVE COMBUSTION CHAMBER SUB-ASSEMBLY

  1. A057259E02
    Using SST, remove the 4 combustion chambers and 4 valve seats.
    SST
    09208-48010  

    HINT:
    Arrange the combustion chambers and valve seats in the correct order.


6. REMOVE STUD BOLT

NOTICE:
If a stud bolt is deformed or its threads are damaged, replace it.


7. REMOVE SEMICIRCULAR PLUG
  1. Remove the semicircular plug from the cylinder head.

← COMPONENTS (from Aug 2013)INSPECTION (from Aug 2013) →