Sound Quality is Bad Only when Disc is Played (Volume is Too Low)
Circuit diagnosis · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Aug 2013 – Jul 2014from Aug 2014
INSPECTION PROCEDURE
HINT:
When replacing the radio and display receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).
1. REPLACE DISC AND RECHECK
Replace the disc with a known good one and recheck.
Check if the same trouble occurs again.
OK:
Malfunction disappears.
NG
REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY (Click here)