2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Aug 2013


INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY
  1. Connect the intelligent tester to the DLC3.

  1. Turn the ignition switch to ON.

  1. Turn the intelligent tester on.

  1. Start and warm up the engine.

  1. Idle the engine.

  1. Enter the following menus: Powertrain / Engine and ECT / Active Test / Activate the VVT System (Bank 1).

  1. Operate the camshaft timing oil control valve using the intelligent tester, and then check the engine speed.

    OK:
    Tester Operation
    Specified Condition
    Camshaft Timing Oil Control Valve OFF
    Normal engine speed
    Camshaft Timing Oil Control Valve ON
    Engine idles roughly or stalls soon after camshaft timing oil control valve switched from OFF to ON

    If the result is not as specified, check the camshaft timing oil control valve, wiring and ECM.

← COMPONENTS (from Aug 2013)REMOVAL (from Aug 2013) →