2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

INSPECTION

Inspection · Vehicles built from Aug 2013


INSPECT THERMOSTAT

P013560E03

HINT:
The valve opening temperature is inscribed on the thermostat.

  1. Immerse the thermostat in water, and then gradually heat the water.

  1. Check the valve opening temperature of the thermostat.

    Standard valve opening temperature:
    80 to 84°C (176 to 183°F)

    If the valve opening temperature is not as specified, replace the thermostat.

  1. A224963E02
    Check the valve lift.

    Standard valve lift:
    8.0 to 10 mm (0.315 to 0.394 in.) at 95°C (203°F)

    Text in Illustration 
    *a
    Valve Lift
    If the valve lift is not as specified, replace the thermostat.

  1. Check that the valve is fully closed when the thermostat temperature is below 77°C (171°F).
    If the valve is not fully closed, replace the thermostat.

← REMOVAL (from Aug 2013)INSTALLATION (from Aug 2013) →