REMOVAL
Removal / installation · Vehicles built from Aug 2013
| 1. REMOVE FRONT BUMPER LOWER COVER |
Remove the clip, 5 bolts and front bumper lower cover.
| 2. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY |
Remove the 4 bolts and No. 1 engine under cover.
| 3. REMOVE FRONT HEATER BRACKET (for Cold Area Specification Vehicles) |
Remove the 2 bolts and front heater bracket.

| 4. REMOVE FAN AND GENERATOR V BELT |
Using the pulley set bolt of the tensioner, rotate the tensioner pulley clockwise to loosen the belt tension. Then remove the V belt.
