TERMINALS OF ECU
System information · Vehicles built from Aug 2013
| CHECK COMBINATION METER |


Disconnect the G6 meter connector.
Measure the resistance and voltage according to the value(s) in the table below.
Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
G6-21 (E2) - Body ground
BR - Body ground
Ground
Always
Below 1 Ω
G6-26 (B) - Body ground
L - Body ground
Combination meter B line
Always
11 to 14 V
G6-28 (IG+) - Body ground
R - Body ground
Combination meter IG+ line
Ignition switch ON
11 to 14 V
Reconnect the G6 meter connector.
Measure the voltage according to the value(s) in the table below.
Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
G7-15 (P/SB) - Body ground
L - Body ground
Front passenger seat belt signal
Front passenger seat occupied, seat belt fastened
Below 1 V
Front passenger seat occupied, seat belt unfastened
11 to 14 V
| CHECK CENTER AIRBAG SENSOR |


| Terminal No. |
Symbol |
Description |
| R1-11*1 |
DBE+ |
Front seat inner belt LH (Seat belt buckle switch LH) |
| R1-12*1 |
DBE- |
Front seat inner belt LH (Seat belt buckle switch LH) |
| Q25-11*2 |
DBE+ |
Front seat inner belt RH (Seat belt buckle switch RH) |
| Q25-12*2 |
DBE- |
Front seat inner belt RH (Seat belt buckle switch RH) |
- *1: for LHD
- *2: for RHD


| Terminal No. |
Symbol |
Description |
| R1-11*1 |
LBE+ |
Front seat inner belt LH (Seat belt buckle switch LH) |
| R1-11*2, *3 |
RBE+ |
Front seat inner belt RH (Seat belt buckle switch RH) |
| R1-12*1 |
LBE- |
Front seat inner belt LH (Seat belt buckle switch LH) |
| R1-12*2, *3 |
RBE- |
Front seat inner belt RH (Seat belt buckle switch RH) |
| Q1-14*2, *4 |
RBE- |
Front seat inner belt RH (Seat belt buckle switch RH) |
| Q1-15*2, *4 |
RBE+ |
Front seat inner belt RH (Seat belt buckle switch RH) |
- *1: for LHD
- *2: for RHD
- *3: for 5 Door
- *4: for 3 Door