The Other Caller's Voice cannot be Heard, is too Quiet, or Distorted
Circuit diagnosis · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
INSPECTION PROCEDURE
| 1. CHECK CELLULAR PHONE |
 |
Check if the other caller's voice can be heard properly.
- OK:
- Voice can be heard properly.
- HINT:
- The purpose of this step is to inspect the cellular phone when it is not connected to the vehicle.
|
NG |
 |
|
| REPAIR OR REPLACE CELLULAR PHONE |
|
|
| OK |
|
 |
|
| 2. CHECK AUDIO AND VISUAL SYSTEM |
 |
Check that sound from the audio and visual system can be heard from a front speaker.
- OK:
- Sound can be heard from the audio and visual system.
|
NG |
 |
|
| GO TO "NO SOUND CAN BE HEARD FROM SPEAKERS" IN PROBLEM SYMPTOMS TABLE (Click here)
|
|
|
| OK |
|
 |
|
| 3. CHECK AUDIO SETTINGS |
 |
Check that the received voice level is not set to low.
- OK:
- The received voice level is not set to low.
|
NG |
 |
|
|
|
| OK |
|
 |
|
| GO TO "NO SOUND CAN BE HEARD FROM SPEAKERS" IN PROBLEM SYMPTOMS TABLE (Click here)
|
|