2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

REMOVAL

Removal / installation · Vehicles built Aug 2013 – Jul 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014


1. DISCHARGE FUEL SYSTEM PRESSURE
  1. Discharge the fuel system pressure (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
  1. After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).
  2. When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


3. REMOVE INTAKE AIR SURGE TANK
  1. Remove the intake air surge tank (Click here).


4. DISCONNECT NO. 2 FUEL PIPE SUB-ASSEMBLY

  1. A223036
    Disconnect the No. 2 fuel pipe sub-assembly (Click here).


5. REMOVE FUEL PRESSURE REGULATOR ASSEMBLY
  1. Disconnect the vacuum hose.

  1. A223049
    Remove the 2 bolts and fuel pressure regulator.

  1. Remove the O-ring from the fuel pressure regulator.

← COMPONENTS (from Aug 2013)REMOVAL (from Aug 2014) →