2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

INSTALLATION

Removal / installation · Vehicles built from Aug 2013


1. INSTALL AIR PUMP

  1. A226842E01
    Attach the 3 fittings of the air pump insulator to install the air pump to the bracket.
    Text in Illustration 
    *1
    Insulator
    *2
    Air Pump
    *3
    Air Pump Bracket
    V100135
    Upper

  1. Attach the air pump connector clamp.


2. INSTALL AIR PUMP ASSEMBLY
  1. Install the air pump assembly with the 3 bolts.

    Torque:
    20 N*m{ 204 kgf*cm , 15 ft.*lbf }

  1. Connect the air pump connector and attach the wire harness clamp.


3. CONNECT NO. 1 AIR INJECTION SYSTEM HOSE

  1. A224181E01
    Connect the No. 1 air injection system hose so that its paint mark aligns with the rib of the air pump as shown in the illustration.
    Text in Illustration 
    *1
    Rib
    *2
    Paint Mark
    *a
    Front
    *b
    Upper

    HINT:
    1. Make sure the paint mark of the No. 1 air injection system hose is facing upward.
    2. Make sure the direction of the hose clamp is as shown in the illustration.

← REMOVAL (from Aug 2013)COMPONENTS (from Aug 2013) →