2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

INSTALLATION

Removal / installation · Vehicles built from Aug 2013


1. INSTALL AIR PUMP ASSEMBLY

  1. A223879E01
    Attach the 3 fittings of the air pump insulator to install the air pump to the bracket.
    Text in Illustration 
    *1
    Insulator
    *2
    Air Pump Assembly
    *3
    Air Pump Bracket

  1. Attach the wire harness clamp and air pump connector clamp.

  1. Install the air pump with bracket with the 3 bolts.

    Torque:
    20 N*m{ 204 kgf*cm , 15 ft.*lbf }

  1. Connect the air pump connector and attach the wire harness clamp.


2. INSTALL NO. 1 AIR INJECTION SYSTEM HOSE

A224218E01
Text in Illustration 
*1
Rib
*2
Paint Mark
*a
Upper
*b
RH Side
*c
Front
-
-
  1. Connect the No. 1 air injection system hose to the air tube shown in the illustration labeled A.

    HINT:
    1. Make sure the paint mark of the No. 1 air injection system hose is facing upward.
    2. Make sure the direction of the hose clamp is as shown in the illustration.

  1. Connect the No. 1 air injection system hose so that its paint mark aligns with the rib of the air pump as shown in the illustration labeled B.

    HINT:
    1. Make sure the paint mark of the No. 1 air injection system hose is facing upward.
    2. Make sure the direction of the hose clamp is as shown in the illustration.


3. INSTALL AIR PUMP COVER

  1. A273789E01
    Install the air pump cover with the 3 claws.
    Text in Illustration 
    *1
    Inlet

    HINT:
    Make sure the inlet of the air pump cover is oriented correctly and completely attached when installing the air pump cover.

← INSPECTION (from Aug 2013)COMPONENTS (from Aug 2013) →