2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

REMOVAL

Removal / installation · Vehicles built from Aug 2013


1. REMOVE AIR PUMP COVER

  1. A273787
    Detach the 3 claws and remove the air pump cover.


2. REMOVE NO. 1 AIR INJECTION SYSTEM HOSE

  1. A222509
    Remove the No. 1 air injection system hose from the air pump and air tube.


3. REMOVE AIR PUMP ASSEMBLY

  1. A222510
    Disconnect the air pump connector and detach the wire harness clamp.

  1. A222511
    Remove the 3 bolts, and air pump with bracket.

  1. A273912
    Detach the air pump connector clamp and wire harness clamp.

  1. A223878
    Detach the 3 fittings of the air pump insulator and remove the air pump from the bracket.

← ON-VEHICLE INSPECTION (from Aug 2013)INSPECTION (from Aug 2013) →