2013-2015 Land Cruiser Prado · Service Manual Drivetrain

REMOVAL

Removal / installation · Vehicles built from Aug 2013


1. DRAIN BRAKE FLUID FROM CLUTCH LINE

2. REMOVE FRONT PROPELLER SHAFT ASSEMBLY (for 1GR-FE)
  1. Remove the front propeller shaft (Click here).


3. REMOVE NO. 1 CLUTCH HOUSING COVER (for 1GR-FE)

C215551
  1. Remove the 4 bolts and housing cover.


4. REMOVE CLUTCH ACCUMULATOR ASSEMBLY

  1. for 1GR-FE:

    1. Remove the clutch release cylinder to accumulator tube (Click here).

    2. C215498
      Using a union nut wrench, disconnect the clutch release cylinder to flexible tube.

      HINT:
      Use a container to catch the fluid.

    3. Remove the nut.

    4. C215499
      Remove the 3 bolts and clutch accumulator.

  1. except 1GR-FE:

    1. C217751
      Using a union nut wrench, disconnect the clutch master cylinder to flexible hose tube.

      HINT:
      Use a container to catch the fluid.

    2. C217750
      Using a union nut wrench, disconnect the accumulator to flexible hose tube.

      HINT:
      Use a container to catch the fluid.

    3. C215497
      Remove the 3 nuts and clutch accumulator.

← COMPONENTS (from Aug 2013)INSTALLATION (from Aug 2013) →