2013-2015 Land Cruiser Prado · Service Manual Drivetrain

DISASSEMBLY

Removal / installation · Vehicles built from Aug 2013


1. REMOVE NO. 3 SYNCHRONIZER RING
  1. Remove the No. 3 synchronizer ring from the output shaft.


2. REMOVE OUTPUT SHAFT CENTER BEARING
  1. Remove the output shaft center bearing from the output shaft.


3. REMOVE OUTPUT SHAFT REAR BEARING

  1. C216341E01
    Using SST and a press, remove the output shaft rear bearing from the output shaft.
    SST
    09950-00020  
    09950-60010   (09951-00510)
    09950-70010   (09951-07100)

← COMPONENTS (from Aug 2013)INSPECTION (from Aug 2013) →