2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

REASSEMBLY

Removal / installation · Vehicles built from Aug 2013


1. INSTALL OIL PUMP RELIEF VALVE
  1. Coat the relief valve with engine oil and insert the relief valve and spring into the valve hole.

  1. Install the relief valve plug.

    Torque:
    49 N*m{ 500 kgf*cm , 36 ft.*lbf }


2. INSTALL OIL PUMP COVER
  1. Apply fresh engine oil to the drive and driven rotors.

  1. A223654E01
    Place the drive and driven rotors into the timing chain cover with the marks facing the oil pump cover side.
    Text in Illustration 
    *a
    Mark

  1. A225445
    Install the oil pump cover with the 8 bolts and screw.

    Torque:
    for screw:
    10 N*m{ 102 kgf*cm , 7 ft.*lbf }
    for bolt:
    9.0 N*m{ 92 kgf*cm , 80 in.*lbf }

    Text in Illustration 
    V100135
    Bolt
    V100136
    Screw

← INSPECTION (from Aug 2013)INSTALLATION (Aug 2013 – Jul 2014) →