2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

REMOVAL

Removal / installation · Vehicles built from Aug 2013


1. REMOVE GENERATOR ASSEMBLY
  1. Remove the generator assembly (Click here).


2. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY

  1. E195717E02
    Remove the bolt and disconnect the discharge hose from the cooler compressor.
    Text in Illustration 
    *A
    except Model Code GRJ150L-GKFEKV, GRJ150L-GKAEKV
    *B
    Model Code GRJ150L-GKFEKV, GRJ150L-GKAEKV

  1. Remove the O-ring from the discharge hose.

    NOTICE:
    Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.


3. DISCONNECT SUCTION HOSE SUB-ASSEMBLY

  1. E195718E02
    Remove the 2 bolts and disconnect the suction hose from the cooler compressor.
    Text in Illustration 
    *A
    except Model Code GRJ150L-GKFEKV, GRJ150L-GKAEKV
    *B
    Model Code GRJ150L-GKFEKV, GRJ150L-GKAEKV

  1. Remove the O-ring from the suction hose.

    NOTICE:
    Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.


4. REMOVE COOLER COMPRESSOR ASSEMBLY

  1. E195719
    Disconnect the connector.

  1. Remove the 3 bolts, nut and the cooler compressor.

  1. Remove the stud bolt.

← COMPONENTS (from Aug 2013)DISASSEMBLY (from Aug 2013) →