2013-2015 Land Cruiser Prado · Service Manual Brake

REMOVAL

Removal / installation · Vehicles built from Aug 2013


1. REMOVE REAR WHEEL

2. REMOVE REAR SPEED SENSOR LH

  1. C212844
    Disconnect the speed sensor connector.

  1. Remove the nut and speed sensor.

    NOTICE:
    Pull out the sensor while trying as much as possible not to rotate it.


3. REMOVE REAR SPEED SENSOR RH

HINT:
Use the same procedure described for the LH side.


4. REMOVE SKID CONTROL SENSOR WIRE

C212846
  1. Disconnect the connector.

  1. Detach the connector.

  1. Detach the 8 clamps.

  1. Remove the 2 bolts and 2 sensor clamps.

← COMPONENTS (from Aug 2013)INSPECTION (from Aug 2013) →