2013-2015 Land Cruiser Prado · Service Manual General

SERVICE DATA

Specifications · Vehicles built from Aug 2013

Oil pressure
at idle
29 kPa (0.3 kgf/cm2, 4.3 psi) or more
at idle
29 kPa (0.3 kgf/cm2, 4.3 psi) or more
Oil pressure switch
Tester condition
Condition
Specified condition

1- Body ground
Engine stopped
Below 1 Ω

Engine idling
10 kΩ or higher
Oil pump
Gear tip clearance
Standard
0.110 to 0.240 mm (0.00433 to 0.00945 in.)
Maximum
0.30 mm (0.0118 in.)
Gear body clearance
Standard
0.144 to 0.219 mm (0.00566 to 0.00862 in.)
Maximum
0.40 mm (0.0157 in.)
Gear side clearance
Standard
0.035 to 0.085 mm (0.00135 to 0.00335 in.)
Maximum
0.15 mm (0.00590 in.)
← TORQUE SPECIFICATIONS (from Aug 2013)TORQUE SPECIFICATIONS (from Aug 2013) →