Removal / installation · Vehicles built from Aug 2013
1.
INSTALL PISTON SEAL
Apply a light coat of lithium soap base glycol grease to the entire inner and outer circumference of a new piston seal.
Text in Illustration
*1
Lithium soap base glycol grease
Install the piston seal to the rear disc brake cylinder.
2.
INSTALL CYLINDER BOOT
Apply a light coat of lithium soap base glycol grease to the entire inner circumference of a new cylinder boot.
Text in Illustration
*1
Lithium soap base glycol grease
Apply a light coat of lithium soap base glycol grease to the entire outer circumference of the rear disc brake piston where it contacts the rear disc brake cylinder.
Install the cylinder boot to the rear disc brake piston.
Install the rear disc brake piston to the rear disc brake cylinder.
NOTICE:
Do not forcibly install the piston into the disc brake cylinder.
3.
INSTALL REAR DISC BRAKE PISTON
Install the cylinder boot to the rear disc brake cylinder.
NOTICE:
Install the boot securely into the grooves of the disc brake cylinder.
Push in the rear disc brake piston by hand and install the cylinder boot into the groove of the rear disc brake piston.
NOTICE:
Install the boot securely into the grooves of the piston.