2013-2015 Land Cruiser Prado · Service Manual Steering

DTC CHECK / CLEAR

Troubleshooting · Vehicles built from Aug 2013


CHECK DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Entry&Start / DTC.

  5. Check for DTCs.


CLEAR DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Entry&Start / DTC.

  5. Clear the DTCs.

← DIAGNOSIS SYSTEM (from Aug 2013)DATA LIST / ACTIVE TEST (from Aug 2013) →