REMOVAL
Removal / installation · Vehicles built from Aug 2013
| 2.
REMOVE REAR STABILIZER LINK ASSEMBLY LH |
 |
- Remove the nut and disconnect the stabilizer bar from the stabilizer link.
- HINT:
- If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud.
- Hold the stabilizer bar link with a wrench and remove the nut, retainer, cushion and link.
Remove the 2 retainers and cushion from the stabilizer link.
| 3.
REMOVE REAR STABILIZER LINK ASSEMBLY RH |
 |
- HINT:
- Use the same procedure described for the LH side.
| 4.
REMOVE REAR STABILIZER BAR |
 |
- Remove the 4 bolts, 2 stabilizer brackets and stabilizer bar.
Remove the 2 stabilizer bushes from the stabilizer bar.