TERMINALS OF ECU
System information · Vehicles built from Aug 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
| CHECK DRIVER SIDE JUNCTION BLOCK ASSEMBLY, MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) |


| *A |
for LHD |
*B |
for RHD |
Remove the main body ECU (Click here).
Measure the voltage and resistance according to the value(s) in the table below.
If the result is not as specified, there may be a malfunction in the wire harness.Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
A-30 (BECU) - Body ground
-
Auxiliary battery power supply
Always
11 to 14 V
A-31 (ALTB) - Body ground
-
Auxiliary battery power supply
Always
11 to 14 V
A-32 (IG) - Body ground
-
Ignition switch power supply
Ignition switch ON
11 to 14 V
A-32 (IG) - Body ground
-
Ignition switch power supply
Ignition switch off
Below 1 V
A-29 (ACC) - Body ground
-
ACC power supply
Ignition switch ACC
11 to 14 V
A-29 (ACC) - Body ground
-
ACC power supply
Ignition switch off
Below 1 V
A-11 (GND1) - Body ground
-
Ground
Always
Below 1 Ω
G63-3 (GND2) - Body ground
W-B - Body ground
Ground
Always
Below 1 Ω
Install the main body ECU (Click here).
Measure the voltage according to the value(s) in the table below.
Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
2I-27 (FLCY) - Body ground*1
R - Body ground
Front door LH courtesy switch input
Front door LH open
Below 1 V
2I-27 (FLCY) - Body ground*1
R - Body ground
Front door LH courtesy switch input
Front door LH closed
11 to 14 V
2D-31 (FLCY) - Body ground*2
R - Body ground
Front door LH courtesy switch input
Front door LH open
Below 1 V
2D-31 (FLCY) - Body ground*2
R - Body ground
Front door LH courtesy switch input
Front door LH closed
11 to 14 V
2D-15 (FRCY) - Body ground*1
B - Body ground
Front door RH courtesy switch input
Front door RH open
Below 1 V
2D-15 (FRCY) - Body ground*1
B - Body ground
Front door RH courtesy switch input
Front door RH closed
11 to 14 V
2H-26 (FRCY) - Body ground*2
B - Body ground
Front door RH courtesy switch input
Front door RH open
Below 1 V
2H-26 (FRCY) - Body ground*2
B - Body ground
Front door RH courtesy switch input
Front door RH closed
11 to 14 V
G65-3 (LCTY) - Body ground*3
V - Body ground
Rear door LH courtesy light switch input
Rear door LH open
Below 1 V
G65-3 (LCTY) - Body ground*3
V - Body ground
Rear door LH courtesy light switch input
Rear door LH closed
11 to 14 V
G64-6 (RCTY) - Body ground*3
R - Body ground
Rear door RH courtesy light switch input
Rear door RH open
Below 1 V
G64-6 (RCTY) - Body ground*3
R - Body ground
Rear door RH courtesy light switch input
Rear door RH closed
11 to 14 V
G64-19 (BCTY) - Body ground
G - Body ground
Back door courtesy light switch input
Back door open
Below 1 V
G64-19 (BCTY) - Body ground
G - Body ground
Back door courtesy light switch input
Ignition switch off, all doors closed and back door closed
Pulse generation (see waveform 1 or 2)
G64-1 (GCTY) - Body ground*4
V - Body ground
Glass hatch courtesy switch input
Glass hatch open
Below 1 V
G64-1 (GCTY) - Body ground*4
V - Body ground
Glass hatch courtesy switch input
Ignition switch off, all doors closed and glass hatch closed
Pulse generation (see waveform 3 or 4)
G64-7 (LSFL) - Body ground
G - Body ground
Front door LH lock position switch input
Front door LH unlocked
Below 1 V
G64-7 (LSFL) - Body ground
G - Body ground
Front door LH lock position switch input
Ignition switch off, all doors closed and front door LH locked
Pulse generation (see waveform 5 or 6)
G64-18 (LSFR) - Body ground
G - Body ground
Front door RH lock position switch input
Front door RH unlocked
Below 1 V
G64-18 (LSFR) - Body ground
G - Body ground
Front door RH lock position switch input
Ignition switch off, all doors closed and front door RH locked
Pulse generation (see waveform 7 or 8)
2I-25 (LSWL) - Body ground*1, *3
B - Body ground
Rear door LH lock position switch input
Rear door LH unlocked
Below 1 V
2I-25 (LSWL) - Body ground*1, *3
B - Body ground
Rear door LH lock position switch input
Ignition switch off, all doors closed and rear door LH locked
Pulse generation (see waveform 9 or 10)
2D-16 (LSWL) - Body ground*2, *3
B - Body ground
Rear door LH lock position switch input
Rear door LH unlocked
Below 1 V
2D-16 (LSWL) - Body ground*2, *3
B - Body ground
Rear door LH lock position switch input
Ignition switch off, all doors closed and rear door LH locked
Pulse generation (see waveform 11 or 12)
G63-2 (LSWR) - Body ground*3
V - Body ground
Rear door RH lock position switch input
Rear door RH unlocked
Below 1 V
G63-2 (LSWR) - Body ground*3
V - Body ground
Rear door RH lock position switch input
Ignition switch off, all doors closed and rear door RH locked
Pulse generation (see waveform 13 or 14)
G65-13 (LSWB) - Body ground
SB - Body ground
Back door lock position switch input
Back door lock unlocked
Below 1 V
G65-13 (LSWB) - Body ground
SB - Body ground
Back door lock position switch input
Ignition switch off, all doors closed and back door locked
Pulse generation (see waveform 15 or 16)
G64-25 (PRG) - Body ground
LG - Body ground
Door control receiver output
Key in ignition key cylinder → No key in ignition key cylinder
Pulse generation
G64-26 (RDA) - Body ground
P - Body ground
Door control receiver input
No key in ignition key cylinder, all doors closed and transmitter switch off → on
Pulse generation
2F-13 (BZR) - Body ground
GR - Body ground
Wireless door lock buzzer signal
Wireless door lock buzzer off
Below 1 V
2F-13 (BZR) - Body ground
GR - Body ground
Wireless door lock buzzer signal
Wireless door lock buzzer on
Pulse generation
G64-3 (HAZ) - Body ground
W - Body ground
Hazard warning signal light signal output
Hazard warning signal switch off
Below 1 V
G64-3 (HAZ) - Body ground
W - Body ground
Hazard warning signal light signal output
Hazard warning signal switch on
11 to 14 V
G64-17 (KSW) - Body ground
G - Body ground
Unlock warning switch input
No key in ignition key cylinder
Pulse generation (see waveform 17 or 18)
G64-17 (KSW) - Body ground
G - Body ground
Unlock warning switch input
Key in ignition key cylinder
Below 1 V
- *1: for LHD
- *2: for RHD
- *3: for 5 Door
- *4: w/ Glass Hatch Opener System
- *1: for LHD
Using an oscilloscope, check waveform 1.

Waveform 1 (Reference) Item
Content
Terminal No. (Symbol)
G64-19 (BCTY) - Body ground
Tool Setting
5 V/DIV., 20 ms/DIV.
Condition
Ignition switch off, all doors closed and back door closed
Using an oscilloscope, check waveform 2.

Waveform 2 (Reference) Item
Content
Terminal No. (Symbol)
G64-19 (BCTY) - Body ground
Tool Setting
5 V/DIV., 20 ms/DIV.
Condition
Ignition switch off, all doors closed and back door closed
Using an oscilloscope, check waveform 3.

Waveform 3 (Reference) Item
Content
Terminal No. (Symbol)
G64-1 (GCTY) - Body ground
Tool Setting
5 V/DIV., 20 ms/DIV.
Condition
Ignition switch off, all doors closed and glass hatch closed
Using an oscilloscope, check waveform 4.

Waveform 4 (Reference) Item
Content
Terminal No. (Symbol)
G64-1 (GCTY) - Body ground
Tool Setting
5 V/DIV., 20 ms/DIV.
Condition
Ignition switch off, all doors closed and glass hatch closed
Using an oscilloscope, check waveform 5.

Waveform 5 (Reference) Item
Content
Terminal No. (Symbol)
G64-7 (LSFL) - Body ground
Tool Setting
5 V/DIV., 20 ms/DIV.
Condition
Ignition switch off, all doors closed and front door LH locked
Using an oscilloscope, check waveform 6.

Waveform 6 (Reference) Item
Content
Terminal No. (Symbol)
G64-7 (LSFL) - Body ground
Tool Setting
5 V/DIV., 20 ms/DIV.
Condition
Ignition switch off, all doors closed and front door LH locked
Using an oscilloscope, check waveform 7.

Waveform 7 (Reference) Item
Content
Terminal No. (Symbol)
G64-18 (LSFR) - Body ground
Tool Setting
5 V/DIV., 20 ms/DIV.
Condition
Ignition switch off, all doors closed and front door RH locked
Using an oscilloscope, check waveform 8.

Waveform 8 (Reference) Item
Content
Terminal No. (Symbol)
G64-18 (LSFR) - Body ground
Tool Setting
5 V/DIV., 20 ms/DIV.
Condition
Ignition switch off, all doors closed and front door RH locked
Using an oscilloscope, check waveform 9.

Waveform 9 (Reference) Item
Content
Terminal No. (Symbol)
2I-25 (LSWL) - Body ground
Tool Setting
5 V/DIV., 20 ms/DIV.
Condition
Ignition switch off, all doors closed and rear door LH locked
Using an oscilloscope, check waveform 10.

Waveform 10 (Reference) Item
Content
Terminal No. (Symbol)
2I-25 (LSWL) - Body ground
Tool Setting
5 V/DIV., 20 ms/DIV.
Condition
Ignition switch off, all doors closed and rear door LH locked
Using an oscilloscope, check waveform 11.

Waveform 11 (Reference) Item
Content
Terminal No. (Symbol)
2D-16 (LSWL) - Body ground
Tool Setting
5 V/DIV., 20 ms/DIV.
Condition
Ignition switch off, all doors closed and rear door LH locked
Using an oscilloscope, check waveform 12.

Waveform 12 (Reference) Item
Content
Terminal No. (Symbol)
2D-16 (LSWL) - Body ground
Tool Setting
5 V/DIV., 20 ms/DIV.
Condition
Ignition switch off, all doors closed and rear door LH locked
Using an oscilloscope, check waveform 13.

Waveform 13 (Reference) Item
Content
Terminal No. (Symbol)
G63-2 (LSWR) - Body ground
Tool Setting
5 V/DIV., 20 ms/DIV.
Condition
Ignition switch off, all doors closed and rear door RH locked
Using an oscilloscope, check waveform 14.

Waveform 14 (Reference) Item
Content
Terminal No. (Symbol)
G63-2 (LSWR) - Body ground
Tool Setting
5 V/DIV., 20 ms/DIV.
Condition
Ignition switch off, all doors closed and rear door RH locked
Using an oscilloscope, check waveform 15.

Waveform 15 (Reference) Item
Content
Terminal No. (Symbol)
G65-13 (LSWB) - Body ground
Tool Setting
5 V/DIV., 20 ms/DIV.
Condition
Ignition switch off, all doors closed and back door locked
Using an oscilloscope, check waveform 16.

Waveform 16 (Reference) Item
Content
Terminal No. (Symbol)
G65-13 (LSWB) - Body ground
Tool Setting
5 V/DIV., 20 ms/DIV.
Condition
Ignition switch off, all doors closed and back door locked
Using an oscilloscope, check waveform 17.

Waveform 17 (Reference) Item
Content
Terminal No. (Symbol)
G64-17 (KSW) - Body ground
Tool Setting
5 V/DIV., 20 ms/DIV.
Condition
No key in ignition key cylinder
Using an oscilloscope, check waveform 18.

Waveform 18 (Reference) Item
Content
Terminal No. (Symbol)
G64-17 (KSW) - Body ground
Tool Setting
5 V/DIV., 20 ms/DIV.
Condition
No key in ignition key cylinder