2013-2015 Land Cruiser Prado · Service Manual Brake

INSPECTION

Inspection · Vehicles built from Aug 2013


CHECK SUSPENSION CONTROL SWITCH (DOWNHILL ASSIST CONTROL SWITCH)

  1. C172874E04
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    1 - 4
    Pressed
    Below 1 Ω
    Not pressed
    10 kΩ or higher

    Text in Illustration 
    *a
    Component without harness connected
    (Downhill Assist Control Switch)
    If the result is not as specified, replace the suspension control switch.

← REMOVAL (from Aug 2013)INSTALLATION (from Aug 2013) →