2013-2015 Land Cruiser Prado · Service Manual General

SERVICE DATA

Specifications · Vehicles built from Aug 2013

Spark plug
Electrode gap
Maximum
1.3 mm (0.0512 in.)
Standard
1.0 to 1.1 mm (0.0394 to 0.0433 in.)
Camshaft timing oil control valve
Standard resistance
1 - 2
20°C (68°F)
6.9 to 7.9 Ω
Throttle body with motor assembly
Standard resistance
1 (M-) - 2 (M+)
20°C (68°F)
0.3 to 100 Ω
Mass air flow meter
Standard resistance
4 (THA) - 5 (E2)
-20°C (-4°F)
12.5 to 16.9 kΩ
20°C (68°F)
2.19 to 2.67 kΩ
60°C (140°F)
0.50 to 0.68 kΩ
Camshaft position sensor
Standard resistance
1 (G+) - 2 (G-)
Cold
835 to 1400 Ω
Hot
1060 to 1645 Ω
Crankshaft position sensor
Standard resistance
1 (NE+) - 2 (NE-)
Cold
1630 to 2740 Ω
Hot
2065 to 3225 Ω
Engine coolant temperature sensor
Standard resistance
1 (E2) - 2 (THW)
20°C (68°F)
2.32 to 2.59 kΩ
80°C (176°F)
0.310 to 0.326 kΩ
Knock sensor
Standard resistance
1 (Ground) - 2 (Output)
20°C (68°F)
120 to 280 kΩ
Air Pressure Sensor
Standard Voltage
3 (VC) - 1 (E2)
Ignition switch ON
4.75 to 5.25 V
Air fuel ratio sensor
Standard resistance
1 (HT) - 2 (+B)
20°C (68°F)
1.8 to 3.4 Ω
Heated oxygen sensor
Standard resistance
1 (HT) - 2 (+B)
20°C (68°F)
11 to 16 Ω
← TORQUE SPECIFICATIONS (from Aug 2013)TORQUE SPECIFICATIONS (from Aug 2013) →