2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

INSPECTION

Inspection · Vehicles built from Aug 2013


INSPECT QUICK HEATER ASSEMBLY

  1. E200488E01
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    A-1 - B-1
    23 to 25°C (73 to 77°F)
    0.5 to 2.5 Ω
    A-2 - B-1
    23 to 25°C (73 to 77°F)
    0.5 to 2.5 Ω
    A-2 - B-2
    23 to 25°C (73 to 77°F)
    0.5 to 2.5 Ω
    A-3 - B-2
    23 to 25°C (73 to 77°F)
    0.5 to 2.5 Ω

    If the result is not as specified, replace the quick heater assembly.
    Text in Illustration 
    *1
    Connector A
    *2
    Connector B
    *a
    Component without harness connected
    (Quick Heater Assembly)

← REMOVAL (from Aug 2014)INSTALLATION (Aug 2013 – Jul 2014) →