2013-2015 Land Cruiser Prado · Service Manual Steering

DTC CHECK / CLEAR

Troubleshooting · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014


CHECK DTC
  1. Turn the ignition switch off.

  2. Connect the GTS to the DLC3.

  3. Turn the ignition switch to ON.

  4. Turn the GTS on.

  5. Enter the following menus: Chassis / PPS / Trouble codes.

  6. Read the DTCs following the display on the GTS.

  7. Refer to Diagnostic Trouble Code Chart for DTC information (Click here).


CLEAR DTC
  1. Turn the ignition switch off.

  2. Connect the GTS to the DLC3.

  3. Turn the ignition switch to ON.

  4. Turn the GTS on.

  5. Enter the following menus: Chassis / PPS / Trouble codes.

  6. Clear the DTCs by following the display on the GTS.

  7. Turn the ignition switch off.

  8. Disconnect the GTS from the DLC3.

← DTC CHECK / CLEAR (Aug 2013 – Jul 2014)FAIL-SAFE CHART (from Aug 2013) →