2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

REMOVAL

Removal / installation · Vehicles built from Aug 2013


1. REMOVE CYLINDER HEAD SUB-ASSEMBLY (for Bank 1)
  1. Remove the cylinder head (Click here).


2. REMOVE NO. 1 WATER OUTLET PIPE

  1. A227937
    Detach the 3 wire harness clamps.

  1. Remove the 2 nuts, bolt and water outlet pipe.


3. REMOVE KNOCK SENSOR

  1. A075662
    Disconnect the 2 sensor connectors.

  1. Remove the 2 bolts and 2 sensors.

← COMPONENTS (from Aug 2013)INSPECTION (from Aug 2013) →