2013-2015 Land Cruiser Prado · Service Manual Drivetrain

INSTALLATION

Removal / installation · Vehicles built from Aug 2013


1. INSTALL PROPELLER SHAFT ASSEMBLY
  1. Align the matchmarks on the propeller shaft flange and differential flange.

  1. Install the propeller shaft assembly with the 4 washer, 4 bolts and 4 nuts.

    Torque:
    88 N*m{ 899 kgf*cm , 65 ft.*lbf }

  1. Align the matchmarks on the propeller shaft flange and transfer flange.

  1. Install the propeller shaft assembly with the 4 washers and 4 nuts.

    Torque:
    88 N*m{ 899 kgf*cm , 65 ft.*lbf }

← REASSEMBLY (from Aug 2013)PROBLEM SYMPTOMS TABLE (from Aug 2013) →