Removal / installation · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Aug 2013 – Jul 2014from Aug 2014
1.
PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).
2.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
3.
REMOVE TELEVISION BASE
Detach the 7 claws and 4 clips and remove the television base.
4.
REMOVE TELEVISION DISPLAY ASSEMBLY
Disconnect the connector.
Remove the 4 bolts.
Detach the 2 clips and move the television display assembly as shown in the illustration to detach the 2 guides and remove it.