INSTALLATION
Removal / installation · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
| 1. INSTALL REAR ACCELERATION SENSOR |
Install the rear acceleration sensor with the bolt as shown in the illustration.

- Torque:
- 8.5 N*m{ 87 kgf*cm , 75 in.*lbf }
- NOTICE:
- Replace the rear acceleration sensor with a new one if it is dropped.
Connect the connector.
- NOTICE:
- Securely connect the connector.
| 2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH |
for 3 Door:
(Click here)
for 5 Door:
(Click here)
| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
