2013-2015 Land Cruiser Prado · Service Manual Suspension

REMOVAL

Removal / installation · Vehicles built Aug 2013 – Jul 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
  1. After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).
  2. When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


2. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (for LHD)
(Click here)

3. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (for RHD)
(Click here)

4. REMOVE SUSPENSION CONTROL ECU

  1. C212880
    Disconnect the 3 connectors.

  1. Remove the 2 bolts and suspension control ECU.

    NOTICE:
    Replace the suspension control ECU with a new one if it is dropped.

← COMPONENTS (from Aug 2013)REMOVAL (from Aug 2014) →